COMMERCIAL WINDOW TINTING
OFFICE WINDOW TINTING
The amount of heat reduction depends on the type of film. Darker, more reflective films will offer the highest amount of heat rejection.
No, we are unable to do the installation the same day as the estimate. There is usually a one day turnaround time for estimates to installations.
The installation process depends on the scope of the work and a few various factors (height of the windows, old film removal, type of windows, etc.) Our smaller and mid-size installations usually take about 1-3 hours to complete.
No, it would need to be removed and replaced.
Can tint be repaired?
We occasionally run specials, please give us a call and we can go over any current specials.
Ceramic window films provide a neutral, non-reflective view while keeping out the heat and harmful UV rays. Ceramic films do not obstruct your view from the inside or outside while still allowing the natural light to enter.
There are certain types of films that are not safe to install on dual-pane windows. Installing films like blackout and limo 5% film can cause your dual pane windows to overheat and crack.
The film is usually installed on the interior of the windows. If an exterior installation is needed, we offer films meant for exterior use only.
It is not recommended. If you remove a decal or logo that’s installed on top of film, it may damage the film underneath. It would be the same if you installed a logo under the film as well. The logo underneath the film would get damaged once the film is removed.
There are different factors that can affect the price of an installation (ex. Scope of work, type of film, height of windows, old film removal, etc.).
We typically offer some of the fastest turn around times. The turnaround time for installations depends on factors like scope of work, type of film, shipping time, etc. For small to midsize projects the turnaround time ranges but can be 24-48 hours up to 7 days. For larger projects, the turnaround time can range depending on the scope of work.
A 50% deposit is required upon booking to hold the appointment and to ensure that we can order the specific materials needed for the installation. We order our films new from the manufactures for your project to ensure you have best quality products.
Yes, we can remove old film.
Each of the films are meant for specific purposes (ex. Privacy, heat reduction, uv protection, glare, etc.). The films are recommended based on what your needs and main goals are.
Ceramic films are more expensive because they are formulated to reject a high amount of heat while still being able to maintain the view from the windows.
Look at the edge inside of the window. If there are two panes of glass separated by a spacer, it’s a dual pane window. If there is only one pane of glass with no spacing system, it’s a single pane window.
For interior films, there is a 10-15 year warranty for commercial installations. For exterior films, the warranty can range from 1 year to 7 years. The warranty covers peeling, bubbling, rippling, cracking, adhesive failure, delimitation, and demetallization.
We recommend using a soft cloth or a clean synthetic sponge with soapy water to wipe down your windows. Please avoid using any bristle brushes, abrasive scrubbing sponges, or any materials that may have been contaminated with dirt particles. Some brands of paper towels are not recommended because they are coarse enough to put fine scratches on the film and may reduce the polished appearance of the film over time.
We are a licensed, bonded, and insured company. We carry a 4 million dollar umbrella insurance policy.